High-Capacity Pleated Panel Filter
Medium efficiency pleated panel filter. Contains up to 16 pleats per linear foot. Radial pleat construction for minimum pressure. Available in U.L. Class 2 or 1, in 4”, 2” and 1” depths. Nonwoven cotton/synthetic blend media.
The Camfil Farr 30/30® has been setting the standard by which other medium-efficiency ASHRAE filters have been judged since 1963. With more than 26 design improvements it continues to provide the best value for your air filtration dollar.
Exclusive Media Blend
The exclusive media, manufactured by Camfil Farr so quality is assured, is a specific blend of cotton and polyester fibers. This specific blend incorporates
mechanical particle capture principles and does not require an electret charge to enhance efficiency; efficiency is maintained throughout the life of the filter. The media is formed into a radial pleat to ensure full use of the media area, this combination provides a MERV 7 ASHRAE efficiency, a uniform lowresistance to airflow over the life of the filter, and a longer life in the system than standard capacity filters. This lower resistance converts to energy savings (IE: An average of $10.62 per year based upon 10¢ per KWh).
Efficiency and Strength
The radial pleat is maintained by a welded wire grid that is spot welded on one-inch centers, treated for corrosion resistance and bonded to the media to prevent oscillation. A 28-point high wet-strength beverage board frame, with integral diagonal support members assures filter rigidity in virtually any application. This combination allows Camfil Farr to guarantee the 30/30 to 2.0” w.g. without failure of the media pack.
Sizes for any Application
Available in 1” deep, 2” deep, or 4” deep configurations, the 30/30 is ideal for commercial, industrial, medical, institutional or any other application where improved air quality is a concern.
This link will open up a PDF document with more detailed information