High Capacity Pleated Filter with Header
Medium efficiency pleated panel filter. Contains up to 16 pleats per linear foot. Radial pleat construction for minimum pressure. Available in U.L. Class 2 or 1, in 4”, 2” and 1” depths. Nonwoven cotton/synthetic blend media.
Unique Channel for Housing Application
The Camfil Farr 30/30® SA filter is designed for medium efficiency ASHRAE applications requiring a nominal 1” deep header for installation into the filter track of a side-access filter housing. The 30/30 SA provides a higher efficiency than short bags or cube filters (10-30 points higher when evaluated under ASHRAE Standard 52.2). Its extended surface area results in a lower average pressure drop offering energy savings and a longer life within the HVAC system.
Exclusive Media Blend
The media, manufactured by Camfil Farr so quality is assured, is a unique blend of cotton and polyester fibers. Formed into a radial pleat, this combination provides a MERV 7 ASHRAE efficiency and a uniform low resistance to airflow over the life of the filter. The 30/30 SA 4” depth allows the use of up to 25 square feet of media resulting in an extended service life – thereby reducing the number of required changes per year.
Efficiency and Strength
The Camfil Farr 30/30 SA’s radial pleat is maintained by a welded wire grid, spot welded on one-inch centers, treated for corrosion resistance and bonded to the media to prevent oscillation. A 28-point high wet-strength beverage board frame, with integral diagonal support members ensures filter rigidity in virtually any demanding application. The 30/30 SA is guaranteed to 2.0” w.g. without failure of the media pack.
Sizes for any Application
Available in 1” deep, 2” deep, or 4” deep configurations, the 30/30 is ideal for commercial, industrial, medical, institutional or any other application where improved air quality is a concern.
This link will open up a PDF document with more detailed information